Application
|
1.
|
The floor surface should be sound and not cracking. It
should also be clean. |
2.
|
Decals
should not be applied to a freshly varnished floor. The
varnish needs at least three weeks to outgas before it
is safe to apply decals. |
3.
|
Always
use the provided squeegees. |
4.
|
Be
careful not to stretch the decal during the application
process. The decals are made of vinyl and stretching the
vinyl may distort the image that is printed on it. |
5.
|
Puncture
air bubbles with a pin and resqueegee. |
|
View
graphical application instructions.
|
|
|
Removal |
1.
|
This
decal is removable for a period of up to one year. It
can be easily removal without leaving any adhesive residue
if you follow the removal procedure. |
2.
|
The
best results are attained when the floor temperature is
between 60 and 80 degrees F. |
3.
|
Start
with one of the corners. Pull the decal back toward you
at less than 90 degree angle. You must pull SLOWLY. |
4.
|
If
the decal is not removing cleanly, it may be necessary
to use a heat gun. |
|
|
Don
Shafer Display products are sold with the understanding
the buyer will test them before actual use and determine
for himself their adaptability to his intended uses. Don
Shafer Display's obligation under this warranty is in
lieu of any other warranty express or implied. Under no
circumstances will Don Shafer Display be liable for any
loss, damage, expense or consequential damages of any
kind arising out of the use, or inability to use, Don
Shafer Display products. |